A tip to keep your sealing tape clean

Here's how to prevent the vinyl from sneaking in between your veneer and mold, so that you get a nice tight pressing

There is an art to opening the sealed end of your TAP bag.

Breather netting provides a pathway for the air to find it's way out of the Thin Air Press.

Sometimes you need a little extra clamping power to make sure those radical bends shape up nicely.

Worst case scenario when working with your Thin Air Press vacuum bag is that you will get a hole or tear in the vinyl of your bag.

The vast majority of leaks that occur when using the Thin Air Press vacuum bag come from the sealing tape on the one open end of the bag. Read these tips on how to avoid these issues.

if you find yourself with a warped deck, we've got a relatively easy DIY solution to try and fix it.

Video shows how to cut 1/16" veneers for building longboards.

Many people ask if it is possible to make a drop board using our Thin Air Press. This tutorial goes through the process involved to making this type of deck.

This tutorial shows how to build a 1″ drop deck in one glue-up. The great thing about this deck is it can be built in less than 3 hours (not including the glue drying time).

This tutorial goes through in detail, the steps to laminate carbon fiber onto the top and bottom of a skateboard deck.

Here is an easy fix that will help keep your carbon fiber straight and without annoying pulls in the cloth. This tip will help the finished job look cleaner and more professional.

This tutorial describes all the steps necessary to laminate our ROCKITLAM to a longboard.

Here is a tutorial on how to apply camber to one of our pintail decks or a custom shaped longboard.

This tutorial shows how to prepare the surface for painting.